The cellranger-arc workflow starts by demultiplexing the Illumina sequencer's base call files (BCLs) for each flow cell directory (ATAC or Gene Expression) into FASTQ files. 10x Genomics has developed cellranger-arc mkfastq, a pipeline that wraps Illumina's bcl2fastq and provides a number of convenient features in addition to the features of bcl2fastq:

• Supports demultiplexing of ATAC or Gene Expression (GEX) flow cells
• Translates 10x Genomics sample index names into the corresponding oligonucleotides in the sample index.
• Supports a simplified CSV sample sheet format to handle 10x Genomics use cases.
• Supports most bcl2fastq arguments, such as --use-bases-mask.

The Multiome ATAC library is single-indexed while the Multiome GEX library is dual-indexed. cellranger-arc mkfastq can auto-detect the type of flow cell based on the length of the i5 index read and selects the appropriate mode depending on the sample indexes used, and enables index-hopping filtering automatically for dual-indexed flow cells. For example, a Multiome GEX library prepared with the Dual Index Kit TT Set A, well A1 can be specified in the sample sheet as "SI-TT-A1", and cellranger-arc mkfastq will recognize the i7 and i5 indices as GTAACATGCG and AGTGTTACCT, respectively. Similarly for a Multiome ATAC library prepared with Single Index Kit N Set A, well A1 can be specified in the sample sheet as "SI-NA-A1", and cellranger-arc mkfastq will recognize the four i7 indexes (AAACGGCG, CCTACCAT, GGCGTTTC, and TTGTAAGA) and merge the resulting FASTQ files.

The compute workflow begins with running one instance of cellranger-arc mkfastq for each flow cell of data being analyzed. The same command cellranger-arc mkfastq can be used to demultiplex ATAC and GEX flow cells. Once the ATAC flow cell(s) and GEX flow cell(s) are successfully demultiplexed, one instance of cellranger-arc count is run for each paired Multiome ATAC and GEX library; independent of the number of sequencing runs of each library. Specific examples are described below.

In this example, a Multiome ATAC library (with sample index SI-NA-A1) and a Multiome GEX library (with sample index SI-TT-A1) were processed on different flow cells. The GEX library was processed on lane 1 of its flow cell, whereas the ATAC library was processed on lane 2 of its flow cell. Then, a separate instance of cellranger-arc mkfastq is run for each library, and all resultant FASTQ files are processed though a single instance of cellranger-arc count.

In this example, one Multiome ATAC library with sample index SI-NA-A1 was sequenced on two flow cells. The cellranger-arc count pipeline cannot process ATAC libraries alone.

In this example, two Multiome GEX libraries (each processed through a separate GEM well with sample indices SI-TT-A1 and SI-TT-A2) are multiplexed on a single flow cell. GEX Library 1 was processed on lane 1 and GEX Library 2 was processed on lane 2 of the same flow cell. The cellranger-arc count pipeline cannot process GEX libraries alone.

The cellranger-arc mkfastq pipeline accepts additional options beyond those shown in the table below because it is a wrapper around bcl2fastq. Consult the User Guide for Illumina's bcl2fastq for more information.

The cellranger-arc mkfastq pipeline recognizes two file formats for describing samples: a simple, three-column CSV format, or the Illumina Experiment Manager (IEM) sample sheet format used by bcl2fastq. Both these formats are illustrated with a Multiome ATAC flow cell and Multiome GEX flow cell example.

The example (tiny-bcl-atac) dataset is solely designed to demo the cellranger-arc mkfastq pipeline. It cannot be used to run downstream pipelines (e.g. cellranger-arc count).

To follow along, do the following:

1. Download the tiny-bcl-atac tar file and tiny-bcl-gex tar file.
2. Untar both the cellranger-arc-tiny-bcl-atac-1.0.0.tar.gz and cellranger-arc-tiny-bcl-gex-1.0.0.tar.gz tar files in a convenient location.
3. Download the simple CSV layout files: cellranger-arc-tiny-bcl-atac-simple-1.0.0.csv and cellranger-arc-tiny-bcl-gex-simple-1.0.0.csv.
4. Download the Illumina Experiment Manager samplesheets: cellranger-arc-tiny-bcl-atac-samplesheet-1.0.0.csv and cellranger-arc-tiny-bcl-gex-samplesheet-1.0.0.csv.

A simple CSV sample sheet is recommended for most sequencing experiments. The simple CSV format has only three columns (Lane, Sample, Index), and is thus less prone to formatting errors. You can see an example of this in cellranger-arc-tiny-bcl-atac-simple-1.0.0.csv:

Copy
Lane,Sample,Index
1,test_sample_atac,SI-NA-A1

and in cellranger-arc-tiny-bcl-gex-simple-1.0.0.csv:

Copy
Lane,Sample,Index
1,test_sample_gex,SI-TT-A1

Here are the options for each column:

To run cellranger-arc mkfastq with a simple layout CSV, use the --csv argument. Here's how to run cellranger-arc mkfastq on the tiny-bcl-atac sequencing run with the simple layout (replace /path/to/cellranger-arc-tiny-bcl-atac-1.0.0 with the path to cellranger-arc-tiny-bcl-atac on your system):

Copy
$ cellranger-arc mkfastq --id=tiny-bcl-atac \
                     --run=/path/to/cellranger-arc-tiny-bcl-atac-1.0.0 \
                     --csv=cellranger-arc-tiny-bcl-atac-simple-1.0.0.csv




cellranger-arc mkfastq (2.0.2)
Copyright (c) 2020 10x Genomics, Inc.  All rights reserved.
-------------------------------------------------------------------------------


Martian Runtime - v4.0.5
Running preflight checks (please wait)...
yyyy-mm-dd hh:mm:ss [runtime] (ready)           ID.tiny-bcl-atac.MAKE_FASTQS_CS.MAKE_FASTQS.PREPARE_SAMPLESHEET
yyyy-mm-dd hh:mm:ss [runtime] (split_complete)  ID.tiny-bcl-atac.MAKE_FASTQS_CS.MAKE_FASTQS.PREPARE_SAMPLESHEET
yyyy-mm-dd hh:mm:ss [runtime] (run:local)       ID.tiny-bcl-atac.MAKE_FASTQS_CS.MAKE_FASTQS.PREPARE_SAMPLESHEET.fork0.chnk0.main
yyyy-mm-dd hh:mm:ss [runtime] (chunks_complete) ID.tiny-bcl-atac.MAKE_FASTQS_CS.MAKE_FASTQS.PREPARE_SAMPLESHEET
...

The cellranger-arc mkfastq pipeline can also be run with a sample sheet in the Illumina Experiment Manager (IEM) format. An IEM sample sheet has several fields specific to running on Illumina platforms, including a [Data] section where sample and index information is specified. cellranger-arc mkfastq supports listing either index set names or the oligo sequences.

Example [Data] section for a dual-indexed Multiome GEX flow cell

Version 1: "SI-TT-A1" refers to a 10x Genomics dual-indexed library sample index, so mkfastq auto-detects that this is a dual-index sample. In this example, only reads from lane 1 will be used. To demultiplex the given sample index across all lanes, omit the lanes column entirely.

Copy
[Data]
Lane,Sample_ID,index
1,test_sample,SI-TT-A1

Version 2: The index sequences for "SI-TT-A1" are specified in the two index and index2 columns.

Copy
[Data]
Lane,Sample_ID,index,index2
1,test_sample,GTAACATGCG,AGGTAACACT

Example [Data] section for a single-indexed Multiome ATAC flow cell

Version 1: "SI-NA-A1" refers to a 10x Genomics single-indexed sample index consisting of a set of four oligo sequences.

Copy
[Data]
Sample_ID,index
test_sample_miseq,SI-NA-A1

Version 2: The four index sequences for "SI-NA-A1" are specified in separate rows under the index column.

Copy
[Data]
Lane,Sample_ID,index
1,sample1,AAACGGCG
1,sample1,CCTACCAT
1,sample1,GGCGTTTC
1,sample1,TTGTAAGA

Sample names must conform to the Illumina bcl2fastq naming requirements. Only letters, numbers, underscores, and hyphens are allowed. No other symbols, including dots ("."), are allowed.

Also note that while an authentic IEM sample sheet will contain other sections above the [Data] section, these are optional for demultiplexing. To avoid data loss from trimming, we do not recommend including adapter sequences in the [Settings] section of the sample sheet (see this article for details). For demultiplexing an existing run with cellranger-arc mkfastq, only the [Data] section is required.

Next, run the cellranger-arc mkfastq pipeline, using the --samplesheet argument (replace /path/to/tiny-bcl-atac with the path to tiny_bcl on your system):

Copy
$ cellranger-arc mkfastq --id=tiny-bcl-atac \
                     --run=/path/to/tiny-bcl-atac \
                     --samplesheet=cellranger-arc-tiny-bcl-atac-samplesheet-1.0.0.csv




cellranger-arc mkfastq (2.0.2)
Copyright (c) 2020 10x Genomics, Inc.  All rights reserved.
-------------------------------------------------------------------------------


Martian Runtime - v4.0.5
Running preflight checks (please wait)...
yyyy-mm-dd hh:mm:ss [runtime] (ready)           ID.tiny-bcl-atac.MAKE_FASTQS_CS.MAKE_FASTQS.PREPARE_SAMPLESHEET
yyyy-mm-dd hh:mm:ss [runtime] (split_complete)  ID.tiny-bcl-atac.MAKE_FASTQS_CS.MAKE_FASTQS.PREPARE_SAMPLESHEET
yyyy-mm-dd hh:mm:ss [runtime] (run:local)       ID.tiny-bcl-atac.MAKE_FASTQS_CS.MAKE_FASTQS.PREPARE_SAMPLESHEET.fork0.chnk0.main
yyyy-mm-dd hh:mm:ss [runtime] (chunks_complete) ID.tiny-bcl-atac.MAKE_FASTQS_CS.MAKE_FASTQS.PREPARE_SAMPLESHEET
...

If you encounter any preflight errors, refer to the Troubleshooting page.

Once the cellranger-arc mkfastq pipeline has successfully completed, the output can be found in a new folder named with the value provided to cellranger-arc mkfastq in the --id option (if not specified, defaults to the name of the flow cell):

Copy
cellranger-arc mkfastq --id=tiny-bcl-atac \
                     --run=/path/to/tiny-bcl-atac \
                     --samplesheet=cellranger-arc-tiny-bcl-atac-samplesheet-1.0.0.csv




cellranger-arc mkfastq (2.0.2)
Copyright (c) 2020 10x Genomics, Inc.  All rights reserved.
-------------------------------------------------------------------------------


Martian Runtime - v4.0.5

...

Pipestance completed successfully!

yyyy-mm-dd hh:mm:ss Shutting down.
Saving pipestance info to "tiny-bcl-atac/tiny-bcl-atac.mri.tgz"

$ ls -l
drwxrwxr-x 4 jdoe jdoe      4096 Aug 29 15:29 tiny-bcl-atac

The key output files can be found in outs/fastq_path, and are organized in the same manner as a conventional bcl2fastq run:

Copy
$ ls -l tiny-bcl-atac/outs/fastq_path/
total 31744
drwxrwxr-x 3 jdoe jdoe       24 Sep  7 22:49 p1
drwxrwxr-x 3 jdoe jdoe       26 Sep  7 22:48 Reports
drwxrwxr-x 2 jdoe jdoe      193 Sep  7 22:48 Stats
-rw-rw-r-- 1 jdoe jdoe  3806257 Sep  7 22:48 Undetermined_S0_L001_I1_001.fastq.gz
-rw-rw-r-- 1 jdoe jdoe   967448 Sep  7 22:48 Undetermined_S0_L001_R1_001.fastq.gz
-rw-rw-r-- 1 jdoe jdoe  5773976 Sep  7 22:48 Undetermined_S0_L001_R2_001.fastq.gz
-rw-rw-r-- 1 jdoe jdoe 12635207 Sep  7 22:48 Undetermined_S0_L001_R3_001.fastq.gz

$ tree tiny-bcl-atac/outs/fastq_path/tiny-bcl-atac/
tiny-bcl-atac/outs/fastq_path/p1
└── s1
    ├── test_sample_miseq_S1_L001_I1_001.fastq.gz
    ├── test_sample_miseq_S1_L001_R1_001.fastq.gz
    ├── test_sample_miseq_S1_L001_R2_001.fastq.gz
    └── test_sample_miseq_S1_L001_R3_001.fastq.gz

This example was produced with a sample sheet that included p1 as the Sample_Project, so the directory containing the sample folders is named p1. If a Sample_Project wasn't specified, or if a simple layout CSV file was used (which does not have a Sample_Project column), the directory containing the sample folders would be named according to the flow cell ID instead.

To remove the Undetermined FASTQs from the output, you can run mkfastq with the --delete-undetermined flag. To see all cellranger-arc mkfastq options, run cellranger-arc mkfastq --help.

If the pipeline crashes while running cellranger-arc mkfastq, upload this tarball (with the extension .mri.tgz) found in your output directory. Replace your@email.edu with your email

Copy
cellranger-arc upload your@email.edu jobid.mri.tgz

where jobid is what you input into the --id option of mkfastq (if not specified, defaults to the ID of the flow cell).

This tarball contains numerous diagnostic logs that we can use for debugging.

You will receive an automated email from 10x Genomics. If not, email support@10xgenomics.com. For the fastest service, respond with the following:

• The exact cellranger-arc command line you used.
• The sample sheet that you used.
• The RunInfo.xml and runParameters.xml files from your BCL directory.
• The kind of libraries you are demultiplexing (including chemistry).

• Run cellranger-arc count.
• Learn how to specify FASTQs: Input FASTQ files must conform to the naming conventions of bcl2fastq and mkfastq for cellranger-arc count to successfully complete.
• Learn about cellranger-arc algorithms.